Led downlight provider today: What is Magnetic Track Lighting, and how does it work? The magnetic track light is a kind of light fixture installed on the track by the magnet on the light fixture. The track is composed of an aluminum shell, copper conductor, and iron sheet. When the luminaire with magnet is close to the iron sheet in the track, the luminaire will be adsorbed on the trail without any tools, and at the same time the luminaire is in contact with the copper conductor, then powered by an AC110-220V to DC48V transformer for the whole track lighting system. Read additional info on led panel light factory.
What is LED landscape lighting, and how does it work? LED Landscape Lighting is the replacement for traditional high-pressure sodium (HPS) and metal halide lights. It’s a fixture designed as an alternative light source for outdoor lighting. LED landscape lighting has built-in semiconductors called LEDs (Light Emitting Diode) that emit light when an electric current passes through them. The electrons are forced into higher energy levels when exposed to ultraviolet or blue rays but gradually return to their normal state with the release of energy through the emission of particles that make up light. In short, LEDs provide more light and use less power than traditional filament lighting.
Wattage is a measure of the energy consumption of a lamp, not the amount of light it emits. For led floodlights, generally 10W to 1000Watt optional. For small places, it is enough for 10W-50Watt, they are suitable for installation at a height of 3-5 meters. Then the higher wattage is better choices for higher place. The beam angle of the led flood lights are wide or narrow, and the range is between 3°～140°. Different application places have different requirements for the luminous angle. For some trees, landscapes or building outlines, it is more suitable to choose a narrow beam angle led floodlights, which can play a key part of the lighting effect, highlighting the characteristics of the illuminated object. However, for large spaces, then the wide distribution floodlights will be much better, such as 120° or 70*140°.
Instantaneous start-up. No need for a pre-warm-up start-up. Low Light decay. It is 1% decrease at 3000 hours. 3% decrease in 10000 hours. Environment-friendly. Led floodlights do not contain mercury, toxic gases, and liquids, and will not pollute the environment. At the same time, some lamps can be replaced and reused by outdoor LED flood light bulbs. As the latest generation of lighting fixtures, LED floodlights have the characteristics of environmental protection, energy saving and high luminous efficiency. More and more people choose it to replace traditional metal halide flood light or HPS flood light. So, what is a LED floodlight equivalent to metal halide/HPS flood lights? Stronger R&D: We are always keeping innovation in led lights according to markets trend. It is ok to research and development based on your ideas and advice.
GRNLED (Golumen) is the best magnetic track lighting manufacturer, factory, and supplier in china since 2018, with ISO9001:2015, providing high-quality magnet track light with Osram, Philips chips, and 2.4G TUYA WIFI, BLUETOOTH, ZIGBEE smart magnetic track lighting system with low voltage DC48V or 110V/220-240VAC input voltage at a competitive price. Our magnetic linear track lights have been CE RoHS approved. It is ok to do ETL, UL, CSA, SAA, and CB magnetic track lights if needed.
DOB Led flood lights: “DOB” is the abbreviation of “Driver on board”, which means that the power supply is on the board. The so-called DOB led floodlights means that the AC power supply and led chips are integrated on the PCB at the same time. It is also called driverless AC LED flood lights. The cost of this luminaries is the lowest, but in terms of quality, it is not as good as floodlights with constant current drive. Moreover, the input voltage of most DOB Flood lights can only be 220-240VAC, and the power factor is generally only about 0.5-0.6. Africa, Middle East, Southeast Asia, South Asia, South America non-developed markets. This kind of lamps is not suitable for commercial and industrial projects and places with strict quality requirements.
What is the cost of one solar street light? The cost of a solar street light can vary greatly depending on the type of light, the size, and the features included. Generally, a basic solar street light can cost anywhere from $50 to $500. How long do solar street lights Last? Solar street lights typically last for 3-5 years, depending on the quality of the product and the environment in which it is used. I believe everyone has noticed that some LED streetlights ( cobra head led street lights or modular street lights )on the street emit yellow light, and some emit white light. In our impression, LED street lights in cities generally emit warm yellow light. Street lamps are emitting white light. Why is this so? In fact, the difference between yellow light and white light lies in the choice of the color temperature of LED street lamps, so what color temperature should be used for LED street lamps? Next, LED street lamp manufacturer GRNLED will briefly talk about this issue with you.
The magnetic grid spotlight is a directional lighting fixture with PMMA reflector and OSRAM chips with high CRI 90. Narrow beam angle 24°/36° optional. Suitable for use with magnetic line lights as basic lighting in the living room, dining room, corridor, etc. The magnetic linear lights also called magnetic linear floodlights, it is wide distribution 120° beam angle to be general lighting in large spaces like living rooms, offices, etc. Available 1ft/2ft/3ft/4ft in length. 3000K/4000K/6500K color temperature or 3CCT dimmable available.
What are the types of solar street lights? Standalone Solar Street Lights: Standalone solar street lights are independent of the grid and require no external power supply. They are powered by a solar panel and battery combination and are typically used in remote areas where grid power is not available. Grid-Connected Solar Street Lights: Grid-connected solar street lights are connected to the grid and require an external power supply. They are powered by a solar panel and battery combination and are typically used in urban areas where grid power is available.
The flicker/flashing of led lights is mainly related to LED chips or LED driver (power supply), and LED floodlights is no exception. First, the quality of LED chips. Normal single 1W led chips withstand current: 280-300mA, voltage: 3.0-3.4V. If you use low-quality LED chips, it will not match the standard LED drive power parameters. Once the Led chips are subjected to excessive current, it will flash on and off. In severe cases, the gold wire or copper wire built in the chips will be burned, causing the chips to not light up. Find more details at https://grnled.com/.
GRNLED and GOLUMEN is the best led light manufacturer in china, with ISO9001:2015 approval. And our products mostly got CE-LVD, EMC, and RoHS certificates. It is ok for us to get CB, ETL, SAA, UL, cUL, SASAO, etc if requested. OEM/ ODM available, making design freely for led lights, or color boxes. Providing IES Files for DiaLux testing. No MOQ limits for retailers, wholesalers, distributors, or engineering companies. Customization is available.