Quality textile testing machines wholesale? GESTER instruments is a national high-tech textile testing equipment manufacturers engaged in R&D and production of high precision physical properties textile testing instruments with 22 years experience, expertly specialized in providing integrated laboratory testing solutions for children’s products, textile, footwear and furniture. It has passed ISO 9001 certificate, “AAA Enterprise in Quality, Service and Credit” and was audited as SGS audited supplier. Discover more information at martindale abrasion tester.
With several modes of operation (spray, alternating light and dark, revolution), can simulate the real climate state. Individual timing of each sample clamp may enable different sample test in a same tester and facilitate test monitor and reduce operation cost. 7-inch color touch screen, various test monitor models(animation, figure and chart), simply operate, directly and clear. 1000 hours of continuous operations. Industrial grade microcontroller with strong antijamming capability. Xenon arc light fastness tester: 12 working positions monitoring, can set and inquire the irradiation energy. Possess fault prompt functions and self-diagnostic function.
Correct use of computerized universal testing machine: It is strictly forbidden to use the Computerized Universal Tensile Strength Testing Machine price for overload and super speed. It is strictly forbidden to hit the lifting screw with hard objects and put on the lubricating oil on time. When mechanically replacing the V-belt, pay attention to the position of the hand to prevent pinching the finger. The transmission part must be covered with a protective cover.
The AC servo drive system with low noise and wide range of applications. Pneumatic Bursting Strength Tester Test Methods: Constant Time Bursting. The tester bring saving and printing functions and support on-line operation. Provide on-line interfaces, professional detection software which can be used to analysis testing result. Summary of Test Method: A specimen is clamped over an expandable diaphragm. The diaphragm is expanded by fluid pressure to the point of specimen rupture. The difference between the total pressure required to rupture the specimen and the pressure required to inflate the diaphragm is reported as the bursting strength.
The principle of testing that you should know: Stitch the sample with one or two pieces of specified multi-fiber adjacent fabric, which is placed in soap solution or other washing solution, mechanically stirred at the specified time and temperature, cleaned and dried. Taking the original sample as the reference sample, assess the discoloration of the sample by the left gray scale, and then assess the color stain of the adjacent fabric by the right gray scale. Find additional details at https://www.gesterinstruments.com/.
The values stated in SI units are to be regarded as the standard, with the exception of mils when determining coating thickness.Test Procedure: The haze or original weight of test specimen is measured. The test specimen is then placed on the taber wear and abrasion tester. A 250, 500, or 1000-gram load is placed on top of the abrader wheel and allowed to spin for a specified number of revolutions. Different abrading wheels are specified. A haze measurement or final weight is taken. The load and wheel can be adjusted for softer and harder materials.